Size:
60x60x25.4mm
Bearing System: Single Ball Bearing
Rated Voltage: 4.0 ~ 13.8V
Input Current: 0.14A
Input Power: 1.68W
Speed: 4250 RPM
Air Flow: 23.38 CFM
Static Pressure: 5.35 mm-H2O
Noise Level: 34.00 dBA
for
Reference only:
-
DC Fans usually come in 5V, 12V, 24V or 48V. Computer
fans, PC systems fans, CPU cooling fans, Chipset fans, hard
drive coolers usually use 12V DC fans or 5V DC fans.
-
Ball Bearings & Sleeve Bearings: Ball Bearings
are better quality bearing option for fans. Ball Bearing Fans
last longer but have higher temperature ratings and it is
noisier. Manufacturers also make Double Ball Bearing Fans
to extend their life circle or Single Ball Bearing Fans
to cut the costs. Sleeve Bearing fans are a less
expensive and less robust alternative to Ball Bearing fans.
-
Ceramic Bearing:
Ceramic bearings are
rotary bearings constructed of ceramic. Ceramic hybrid bearings,
the most common type of ceramic bearing, are constructed of
steel inner and outer rings with ceramic balls in place of
steel. These bearings have several advantages over all steel
bearings, such as higher speed and acceleration capability,
increased stiffness, higher accuracy, lower friction and heat
generation, reduced lubrication requirements, low thermal
expansion, and extended operation life. Bearings containing all
ceramic balls are also nonconductive and are commonly used in
electric motor applications.
Nanometer Ceramic Bearing ( So called Ceramic Bearing,
NC Bearing, NCBearing, or NCB ) has longer
Life Span ( Double Hours of Sleeve and Ball Bearing ), lower
noise, better Durability, Anti-Shock/ Anti-Vibration, Water
Proof, Resistant to Oxidation and Chemicals.
Compare NCB to Steel and Copper on Hardness (HV) and Extension
Coefficient (ETC 10-6/˚C):
NCB - 1340 (HV), 3.0~8.3 (ETC 10-6/˚C),
Steel - 560 (HV), 11.2~14.3 (ETC 10-6/˚C),
Copper - 240 (HV), 20 (ETC 10-6/˚C).
Info Source: Global Win Technology Co., Ltd.
- Hydrodynamic
Bearing ( HDX Hydro Dynamic Technology ): hydrodynamic
bearings are fluid film bearings that rely on a film of oil or
air to create a clearance between the moving and stationary
elements.
-
VAPO Bearing & MagLev Design:
Vapo bearings
are made of a material specially treated for wear-resistance and
impact-resistance. When used in conjunction with the MagLev, it
creates a spring function, which helps the fan motor to bear
impact. MagLev design helps the rotor to rotate
evenly in a fixed orbit within the orbit center without any
friction with the bearing bore. No vibration occurred. This new
system eliminates the use of oil rings and washers, thus leaving
space for the release of gas occurring during normal operation.
No more clogging problems. Vapo bearing is named after this
character.
-
CFM: Cubic Feet per Minute (airflow).
-
DC Fan Power Connector: Computer fans usually get its
power from switching power supply with Molex 4-pin power
connector or with 3-pin PC Mother Board connector to be
connected to the system's main board. Sometimes the DC Fans also
come with different types of 3-pin, 2-pin connectors or just
with bare wires.
-
Brushless DC fans: Most
computers use brushless DC motors since they are clean (no
brushes to create carbon dust or to wear out) and are now
smaller and less expensive.
-
UV (Ultraviolet) -
Part of the electromagnetic spectrum in which
the longest wavelength is just below the visible spectrum,
extending from approximately 4nm to approximately 400nm.
-
How people say this item: 12V Case Fan, 12V System Fan,
12V DC Case Fan, 12V DC System Fan, 12V Brushless DC Case Fan,
12V Brushless DC System Fan, Delta 12V Case Fan, Delta 12V
System Fan, Delta 12V DC Case Fan, Delta 12V DC System Fan,
Delta 12V Brushless DC Case Fan, Delta 12V Brushless DC System
Fan
|