Home > Liquid Cooling > Thermaltake CL-W0033 T-type Water Temperature Indicator

Thermaltake CL-W0033 T-type Water Temperature Indicator

Product Description

Easy Connection

Performance

LCD Monitor

	Fast response probe: Temperature Probe can read the water temp. in a short time
	User Friendly: The temperature probe can be put anywhere within the water cycle
	Quick Install Connectors: The connections of the temperature probe is suitable for tubing from 6mm to 13mm.(Innerdiameter)
	Water Temp. Monitor: The LCD monitor shows the temperature of the water

Detail Information

Indicate the temperature of the water
　

Quick Install Connector

2 additional Quick Install Connectors:
For

10mm (3/8”), &

12mm (1/2”) tubing

Temperature probe

Component

Quick Install Connectors

Velcro

Water Temp. Monitor
　

	Blue back light
	Alarm function with red light
	Record & adjust pre-setting

ON/OFF	power on or power off switch
°C/°F	Celsius and Fahrenheit display switch
RESET	Reset the temperature setting. (MAX & MIN)
REC	Adjust the default temperature by using the cross-head screw driver. Turning the adjustor clockwise will increase temperature threshold while turning the adjustor counter-clockwise will decrease temperature threshold. (The screen should be shown without MIN or MAX, see fig 1). Press the button "REC" to record the temperature.
There are two temperatures shown on the screen (T1, T2). T1 shows the alarm temperature while T2 displays the temperature from the sensor.

Monitor Switch

	NOTE: When the screen is shown MAX, it means the highest temperature you have recorded. In the meanwhile, T1 is the highest temperature you set, T2 is the highest temperature that the sensor detected.
Press "REC" Button

	NOTE: When the screen is shown MIN, it means the lowest temperature you have recorded. In the meanwhile, T1 is the lowest temperature you set, T2 is the lowest temperature that the sensor detected.
Press "REC" Button

Recommendations

These are the recommended locations for the placement of the temperature probe
　