Home > Liquid Cooling > Thermaltake AquaBay M5 Alarm System for Liquid Temp and Liquid Level with Pump reservor CL-W0103
Thermaltake AquaBay M5 Alarm System for Liquid Temp and Liquid Level with Pump reservor CL-W0103
Product Description
Compatible with Thermaltake’s L.C.S( Liquid
Cooling System) and components
Liquid temperature and level monitor in the
5.25" drive bay.
Easily monitor the liquid temperature and level from
LCD panel in the front.
Built-in liquid temperature and level alarm.
‧The signal will flash，error beeps will occur and
the LCD panel will change colors from
blue to red when the coolant is below the "low"
mark.
‧The LCD panel will change colors from blue to red
if the temperature of the system
is higher than the set alarm temperature.
Fast response probe:
‧Temperature probe can detect the water temperature
in real-time.
‧Liquid level probe can detect the coolant level in
real-time.
User Friendly:
The temperature probe can be put at anywhere within
the LCS loop
Quick Install Connectors:
The temperature probe connector is suitable for
tubing of ID 6.4mm(1/4”)/9.5mm(3/8”)
5.25” driver bay
temperature and liquid level display panel
350 CC
liquid tank with liquid level sensor
Temp. probe for ID 6.4
mm(1/4”) and 9.5mm(3/8”) tubing with temperature
sensor
Quick install connectors for
ID 6.4mm(1/4”) and ID 9.5mm(3/8”)
P500 pump with 500L/h flow
rate
Functions of LCD
panel
ON/OFF
Power on
or power off switch
Water temp:
The
current temperature of your liquid
cooling system.
Alarm temp:
The
alarm temperature that you have set
Alarm set:
Reset
the alarm temp
RESET:
Press
the bottom to stop the error beeps and
the signal’s flash if the liquid level
is below the low mark
° C/ ° F:
Celsius
and Fahrenheit display switch
Low water:
The
signal will flash，error beeps will occur
and the LCD panel will change colors
from blue to red when the coolant is
below the "low" mark.
Monitor switch:
Note: When the liquid level is below the “low “
mark , the signal will flash，error beeps will
occur and the LCD panel will change colors from
blue to red for ten minutes if you do not press
the ”RESET” button.
Note: When the water temperature of your system
is higher than the setting temp, the color of
the panel will change from blue to red
Recommendation
These are the recommended
locations for the placement of the LCD
panel，temperature probe and liquid tank
Outlet of CPU waterblock
Outlet
of radiator
Outlet
of liquid pump
Apply to Thermaltake
BigWater 735 and Armor chassis for optimal
thermal solution
These are the recommended
locations for the placement of the LCD
panel，temperature probe and liquid tank
12cm radiator
CPU waterblock
P500 liquid pump
350cc liquid tank
Temp probe
5.25” driver bay temperature
and liquid level display panel
a. Functions of LCD panel
Sampling rate
1 sec
Water
temp. range
0°C ~ 95°C
Resolution
0.1 °C
Accuracy
+/- 1 °C
Display
Constant/Real time
Temp
alarm setting range
25 ° C ~ 70°C+/- 5 ° C
Temp.
normal status
LCD with blue light
Temp.
and liquid level alarm warning
LCD with red light
The signal will flash and error beeps will occur when
the coolant is below the "low" mark
b. P500 pump
-
Rated voltage :DC 12V
- Input current :600 mA
- Bearing: Ceramic bearing
- Flow rate:500L/h
- Connector:3pin，4pin
- LED :Blue
- Noise:16dB
- Life time:80,000 hours
c. Capacity of liquid tank
350
cc
d. The temp. probe
Swiftly read the
temperature of your system
e. Quick install connectors
- for ID 6.4 mm(1/4”)
tubing
- for ID 9.5 mm(3/8”) tubing
